Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Rudder "bearing" -plastic #93696
    svtopaz
    Participant

    Rodd or anyone else…. did you get any pictures?
    B

    in reply to: Lake Okeechobee #75682
    svtopaz
    Participant

    Well I do have a ketch rig…….and an antenna….and for years now I have been saying 53′ is what I have for height……gosh guess I am going to have to measure. We will cross that bridge when I get there ……I did have the rigging redone and was pretty sure it was measured it at that time. Time will tell.

    ~B

    in reply to: Lake Okeechobee #75679
    svtopaz
    Participant

    I appreciate the quick response and all info….

    in reply to: Sagging Cabin Sole #74847
    svtopaz
    Participant

    We are finding it is becoming a little more work as we have a larger gap (3/4 to 1 inch) between the settee and the sole. The plan right now is to remove the bolts from the 2×4 uprights and jack floor slightly and re bolt with new holes. So will update as progress continues………..

    in reply to: Water tank problems #70209
    svtopaz
    Participant

    I found a kink in the overflow loop. I replaced it but have not check to see if it makes a diference. I am going to put new o-rings in. I would love to have the stainless plates but it is to much $$$. Same with the gauges. The hose I replaced was very dirty and very old. Some one also told me about a fitting I can put on my hose to keep the pressure at a certain level. Think I will look into that also.

    Barbara

    in reply to: water tank leaking #70162
    svtopaz
    Participant

    I have a lot of good info here. Bob I like the stainless port idea. I am pretty sure it was the inspection port that is the problem, though I am thinking of changing the vent line also. It is the same as yours, it goes through the bulkhead, just aft of the sink up a foot or so,
    then back down to the bilge. It looks pretty grunchy. So again thanks everyone.

    Barbara

    in reply to: Generators #69486
    svtopaz
    Participant

    Sorry John, I do have a name, it’s Barbara. I have been around here for 6 years or so. I just don’t talk a whole lot. I am a liveaboard in Boston. Perhaps that will jog your memory. Thanks for your input on the generator. I am single handling the boat now And I have this generator that I have to do something with . It sure is heavy and I don’t really like the idea of putting that much weight onboard. But I sure would like the power. Plus I have already invested 2 boat bucks into it. I have no idea what the heck I am doing but I am hoping I will get some good help along the way till I get it done. So I will probably be talking more and asking a bunch of questions from time to time.

    Barb

Viewing 7 posts - 1 through 7 (of 7 total)