[Neil Mcnamara]

No was already done before me but is a very simple modification to do really.

[Neil Mcnamara]

Hi Mike – PO had done the same as on the other thread – ie replaced the original gauge with electronic sender and mounted display in easy view from the helm.

Must admit its a bit flaky on the readings so I do need to have a look at connections etc but is still a better solution than the original setup.

rgds
Neil

1 user thanked author for this post.

Mike Freauf

[Neil Mcnamara]

Hi John – i removed mine and did removed some of the core around the hole and used epoxy to seal it.

How did you clean up the glass? mine is crazed and i can’t see through it at all.

I tried unscrewing the back to remove the glass but its wasn’t going to be moved at all. For now I’ve put it back in to be revisited another day.

Rgds
Neil

1 user thanked author for this post.

Mike Freauf

[Neil Mcnamara]

I have those fittings in the vberth on Blue Pelican converted to led not really happy with them. At the nav station a previous owner has changed the light to a traditional cabin light, it’s not bad but I was thinking about changing it to a strip of LEDs possibly white and red.

[Author]

Posts