- This topic has 5 replies, 3 voices, and was last updated 16 years, 11 months ago by
.
-
Posts
-
-
John, I was reading the thread in the SSCA about
spinnaker poles that has been going on the last few
weeks. I thought maybe I could get away with a
spinaker pole instead of a whisker pole for several of
the reasons both Jack and Evans had expressed.
I can only afford one device and I thought I could
make a non-expanding pole on my own for a about 1/2
the price. A little compromise as to the length I
suppose won’t hurt.
alan____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
To unsubscribe, e-mail:
For additional commands, e-mail:Post generated from Pearson424 Forum using Mail2Forum
-
Alan:
As far as lengths go. Forespar indicates that they make the spinnaker pole
3″ less than the J. I assume that is so you can swing it past the forestay
without disconnecting it at the mast.For reference, the whisker pole that came with my boat goes from 14 ft to 18
ft, so if the J is about 16 ft, that would put you in the middle of my pole.Paul
Quote:<.. snip>Post generated from Pearson424 Forum using Mail2Forum
-
Alan, Where are you located?
On 3/28/08 3:11 AM, alan P wrote :
John, I was reading the thread in the SSCA about
spinnaker poles that has been going on the last few
weeks. I thought maybe I could get away with a
spinaker pole instead of a whisker pole for several of
the reasons both Jack and Evans had expressed.
I can only afford one device and I thought I could
make a non-expanding pole on my own for a about 1/2
the price. A little compromise as to the length I
suppose won’t hurt.
alan____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
To unsubscribe, e-mail:
For additional commands, e-mail:Post generated from Pearson424 Forum using Mail2Forum
-
Rochester New York
On the sunny shores of Lake Ontario – which is
currently buried under 1 foot of snow.
Why?
alan
— Aaron Lynch <> wrote:Alan, Where are you located?
On 3/28/08 3:11 AM, alan P wrote :
John, I was reading the thread in the SSCA about
spinnaker poles that has been going on the lastfew
weeks. I thought maybe I could get away with a
spinaker pole instead of a whisker pole forseveral of
the reasons both Jack and Evans had expressed.
I can only afford one device and I thought I could
make a non-expanding pole on my own for a about1/2
the price. A little compromise as to the length I
suppose won’t hurt.
alan______________________________________________________________________________
______
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
To unsubscribe, e-mail:
For additional commands, e-mail:
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
To unsubscribe, e-mail:
For additional commands, e-mail:Post generated from Pearson424 Forum using Mail2Forum
-
Cuz I have a spinnaker pole I want to get rid of, but I don’t wanna ship it 🙂
On 3/28/08 10:06 AM, alan P wrote :
Rochester New York
On the sunny shores of Lake Ontario – which is
currently buried under 1 foot of snow.
Why?
alan
— Aaron Lynch <> wrote:Alan, Where are you located?
On 3/28/08 3:11 AM, alan P wrote :
John, I was reading the thread in the SSCA about
spinnaker poles that has been going on the lastfew
weeks. I thought maybe I could get away with a
spinaker pole instead of a whisker pole forseveral of
the reasons both Jack and Evans had expressed.
I can only afford one device and I thought I could
make a non-expanding pole on my own for a about1/2
the price. A little compromise as to the length I
suppose won’t hurt.
alan______________________________________________________________________________
______
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
To unsubscribe, e-mail:
For additional commands, e-mail:
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
To unsubscribe, e-mail:
For additional commands, e-mail:Post generated from Pearson424 Forum using Mail2Forum
-
OK then where are you? Dimensions? Price?
Condition?
Why are you not using it?
alan
— Aaron Lynch <> wrote:Cuz I have a spinnaker pole I want to get rid of,
but I don¹t wanna ship it
🙂On 3/28/08 10:06 AM, alan P wrote :
Rochester New York
On the sunny shores of Lake Ontario – which is
currently buried under 1 foot of snow.
Why?
alan
— Aaron Lynch <> wrote:Alan, Where are you located?
On 3/28/08 3:11 AM, alan P wrote :
John, I was reading the thread in the SSCA
about
spinnaker poles that has been going on the
last
few
weeks. I thought maybe I could get away with
a
spinaker pole instead of a whisker pole for
several of
the reasons both Jack and Evans had
expressed.
I can only afford one device and I thought I
could
make a non-expanding pole on my own for a
about
1/2
the price. A little compromise as to the
length I
suppose won’t hurt.
alan______________________________________________________________________________
______
Never miss a thing. Make Yahoo your homepage.
To unsubscribe, e-mail:
For additional commands, e-mail:
______________________________________________________________________________
______
Looking for last minute shopping deals?
Find them fast with Yahoo! Search.http://tools.search.yahoo.com/newsearch/category.php?category=shopping
To unsubscribe, e-mail:
For additional commands, e-mail:
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
To unsubscribe, e-mail:
For additional commands, e-mail:Post generated from Pearson424 Forum using Mail2Forum
-
- You must be logged in to reply to this topic.