×

shaft log hose

Home / Topic / shaft log hose

Forums › General Discussion › shaft log hose

Viewing 3 reply threads
  • Author
    Posts
    • February 23, 2013 at 7:06 pm #68684
      RLeeds
      Participant

      doing the cutlass bearing this year, so figured I might as well do the hose as well. Can anyone tell me the diameter of that hose? I think it is 2 5/8 ro 2 3/4, but I cant tell for sure with the shaft log and hose in place. Also, can anyone recommend a source for this extremely thick walled hose?

      Thanks.

      Rodd Leeds
      Windseeker, #214
      _______________________________________________
      maillist mailing list

      https://pearson424.org/mailman/listinfo/maillist_pearson424.org

      Post generated from Pearson424 Forum using Mail2Forum

    • February 26, 2013 at 5:25 am #79224
      skipmac
      Participant

      Hi,

      Replaced the hose on my shaft log. Sure it was the original and seemed like the prudent thing to do since failure could be a boat sinker.

      Research indicates Buck Algonquin is the brand to buy. Will dig through my notes to find the size.

      Not sure if their is a difference between models but I have a 1 1/2″ bronze prop shaft. Assume yours is the same?

    • February 26, 2013 at 5:27 am #79225
      skipmac
      Participant

      By the way, this is a super strong, chemical resistant hose that is the right stuff for the application. Wouldn’t use just any reinforced hose….. just in case.

    • February 26, 2013 at 2:10 pm #79226
      RLeeds
      Participant

      thanks for that refresher! Buck Alg is the gold standard for that
      application. and yes, all shaft sizes are 1 1/2″.
      awaiting hose inside diameter if you can find it.

      Rodd Leeds
      Windseeker

      Original Message

      Post generated from Pearson424 Forum using Mail2Forum

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.