Mast Pitts & Mail Liost

[Anonymous]

Hey Guys

Can you believe it I’m writing about mast pitts, go figure.

A friend of mine Jack just bought hull #184 I’m #183 anyway in a conversation with him I mentioned the mast pitts ya’ll are buying. He would be interested if it is not too late

He also needs to be put on our mail list. His name and address listed below.

Jack Coulter – ()

Thanks
Mike Bogie
#183.

—
Thank You,
Mike Bogie

Bogie Hardware, Inc.
800-278-3309 or Fax 800-590-9659
() or ()
http://www.bogiehardware.com

Post generated from Pearson424 Forum using Mail2Forum

[madsailor]

Hi Mike,

I can't imagine they'd be unhappy to hear from Jack. Here's the info from Tor:

Greetings Pulpiteers,

OK, we’re all set to order our mast pulpits now. The fabricator, Railmakers Inc, needs the following information from
each of you who wish to participate in the group-rate order:

– Your Name
– Shipping Address
– Day Phone Number
– Email Address
– MasterCard of Visa (number, expiration date, 3-digit security number, billing address zip code)

– Also, you MUST specify to Railmakers directly whether or not you want the mid-level stepping bar option for an
additional $90.

Please call, email or fax your information directly to Dave (David Hawley, Manager) at Railmakers between today,
Wednesday the 27th, and this Friday the 29th. Remember they’re on Pacific Standard Time, 3 hours earlier than East Coast
time:

Railmakers, Inc.
David Hawley, Manager
864 West 18th Street
Costa Mesa, CA 92627

Phone: (949)642-6506
Fax : (949)642-8066
Email: ()
URL : http://www.railmakers.com

Railmakers is going to build all of the mast pulpits at the same time. Once they get payment info from all of us, they
predict it will be one to two weeks for production, plus two to three days for polishing and packaging, plus shipping
time (UPS Ground). So for the production run, from time of order to parts in hand figure three to four weeks. I’ve asked
Dave to send the first two pair off the line to Bob Fine and me so we can verify that everything is as it should be.
That way, if there is any little glitch, we can get back to Railmakers about it (hopefully) before they ship the rest.

Here, again, is what you can expect to pay:

$445.00 – per pair of mast pulpits, as per attached FINAL FINAL (mod-10) plan drawings
$ 90.00 – optional stepping Bar
$ 8.50 – packaging
$100.00 – ESTIMATED shipping cost, UPS Ground

Thanks to all of you for your input and your patience.

Reef early,

Tor

---

Silver Heels, P-424 #17
()
http://www.SilverHeels.us

---

On Fri, Mar 14, 2008 at 4:12 PM, Mike Bogie < ([email][/email])> wrote:

Hey Guys

Can you believe it I'm writing about mast pitts, go figure.

A friend of mine Jack just bought hull #184 I'm #183 anyway in a conversation with him I mentioned the mast pitts ya'll are buying. He would be interested if it is not too late

He also needs to be put on our mail list. His name and address listed below.

Jack Coulter – ()

Thanks
Mike Bogie
#183.

—
Thank You,
Mike Bogie

Bogie Hardware, Inc.
800-278-3309 or Fax 800-590-9659
() or ()
http://www.bogiehardware.com

—
Bob Fine
Fine Software LLC
Your data on the web your way. No kidding

Post generated from Pearson424 Forum using Mail2Forum

[Anonymous]

Hi Robert: thanks for getting me involved. Mike must have misundersood me. I’m actually looking for a mast shoe as mine is very badly corroded. I’m getting reay to pull the “stick” and replace it. Metalmast used to make one but I understand they are no longer in business. Have a great week end.
Best Regards/ Jack Coulter CPYB

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[madsailor]

Hi Jack,

Someone else in the list got theirs replaced… Let me see if I can find out who – it's the mast foot.

Bob

On Sat, Mar 15, 2008 at 9:52 AM, Deaton Yacht Sales < ([email][/email])> wrote:

Quote:

Hi Robert: thanks for getting me involved. Mike must have misundersood me. I'm actually looking for a mast shoe as mine is very badly corroded. I'm getting reay to pull the “stick” and replace it. Metalmast used to make one but I understand they are no longer in business. Have a great week end.
Best Regards/ Jack Coulter CPYB

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Anonymous]

Thanks Bob, yea it’s the foot. Best/ jack

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Anonymous]

Jack metal mast is still in Business they are located on main st Putnum Ct. the made my new mast on thisisit.I will ask or look in file for their number for you

Don Barber
Thisisit #81 sloop

---

Original Message —-
<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Anonymous]

Thanks Don – I guess I got some bad info from one of the guys in our yard. Best/Jack

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Anonymous]

RE: Metalmast

I just spoke to subject company owner a few weeks ago
and he still does mast steps, etc., although he is
officially retired. He will do a mast step and provide
a sleeve to go inside the lower portion of a mast . We
did not discuss an elevated step to offset a mast with
a few inches cut off the bottom.

Norris Larson on Easy Reach

— Deaton Yacht Sales <> wrote:

Quote:

Hi Robert: thanks for getting me involved. Mike must
have misundersood me.
I’m actually looking for a mast shoe as mine is very
badly corroded. I’m
getting reay to pull the “stick” and replace it.
Metalmast used to make one
but I understand they are no longer in business.
Have a great week end.
Best Regards/ Jack Coulter CPYB

_____

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Anonymous]

Hi jack here you go Metal mast Marine 55 Providence Putnum Ct 06260 1-860-928-2776

Good luck if you need any thing i can run up there if you need I only live about 15 miles from them

Don

---

Original Message —-
<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Author]

Posts